Feeds:
Posts
Comments

Posts Tagged ‘B. CADDIS JIG’

I will be tying up a series of Jig Patterns and some other patterns on the hooks that were sent to me by my fly tying friend, Jacob Adamerovich. They are available at his shop, the Competitive Angler in Latrobe,PA. Some of these will be used in the Eastern Sierras and a few will travel back to NYC for Michael to use this Summer…

BUG LINE JA HOOKS

The Bug Line…done…

ROAR FORK 78

Some of the above would work well in here…now where would that be ?

BRUSHED LASER & D-RIB CADDIS BRUSHED LASER & D-RIB CADDIS …

HOOK: Hanak 390 BL, #12 – #16

WEIGHT: .010 lead 0r .015 Lead Sub. – 4-6turns

THREAD: Veevus 16/0, Olive

TAG: 2 strands flash, 8-10 strands fiber – DNA Holo Fusion, White – cut short

RIB: Chartreuse D-Rib, Small, 6-7 wraps

ABDOMEN: (In a dubbing Loop) Senyo’s Lase Dub, Light Olive – wrap between ribbing and brush rearward with velcro on a popsicle stick or a bore brush…trim excess with curved scissors

WINGLETS: Flex Floss, Brown

THORAX: 2 Iridescent Peacock Herl Fibers (Spirit River), twisted into a rope, then 3-4 turns

HACKLE: Partridge Feather, Olive

HOT SPOT: Veevus, 8/0, Fl. Orange Thread

BEAD: Black Tungsten, sized to hook

This is just a simple soft hackle Caddis pattern with a subdued rib and shaggy appearance. The DNA tag adds a bit of flash and the hot spot provides a trigger. Fish this pattern directly above your position then let it swing in the current below. Michael nails a lot of nice Browns (below) using this technique…

MOO EWR PURP CAD Michael likes my Caddis patterns…

 

Materials BRUSHED LASER & D-RIB CADDIS…

BRUSHED LASER & D-RIB CADDIS GRP

BRUSHED LASER & D-RIB CADDIS…

DUN MINK UV2 DUN MINK & UV2 – Williams/Variant …

HOOK: Hanak 450 BL, #12 – #16

THREAD: UTC 70 Denier, Gray/Brown

WEIGHT: .010 Lead or .015 Lead Sub.

TAIL: Coq De Leon, Medium Speckled

RIB: Sulky Opalescent Thread

ABDOMEN: Dun Mink underfur, Nature’s Spirit, use a dubbing rake

THORAX: 70/30 Mix SLF Spikey Squirrel, Gray – UV2 Dark Enhancer

BEAD: Silver Tungsten slotted, sized to hook or oversize x1

This is a variation of Loren William’s LW’s Stud. I like tying with mink fur because this material has the unique ability to trap air bubbles. It comes in a wide range of dyed colors…I also use the longer fibers, cut off the skin, for tailing and hackle…

Materials DUN MINK & UV2

DUN MINK & UV2 JIGS…

Shades of MINK work well here…on the East Walker River…

SULPHUR EMERGER – Grobert/Variant…

HOOK: Hanak 390 BL Hook, #14 – #16

THREAD: Abdomen – UTC 70 Denier, Yellow / Thorax forward, Veevus 16/0, Olive

SHUCK: Brown Z-Lon fibers

ABDOMEN: Yellow tying thread

RIB: “Touch dubbed” to Danville 6/0, #47 Tobacco Brown thread, #37, Seal Brown Hareline Fur Dubbin

WING: Snowshoe Hare, Tan

THORAX: Micro Fine Dry Fly Dub, Sulphur Yellow

Another pattern that will be going back East to Michael for his use. I used some other materials than the way Matt Robert ties it HERE….later…

Materials SULPHUR EMERGER… SULPHUR EMERGERS SULPHUR EMERGER(s)… RYCHO Z-WING RYCHO Z-WING (Olive) – Mercer/Variant …

HOOK: Hanak 390 BL Hook, #12 – #16

THREAD: Veevus 16/0, Olive

ABDOMEN: 70/30 Mix, Antron Dubbing, Olive – UV2 Caddis Nymph, Olive

RIB: Sulky Holoshimmer, Black

CARAPACE/BACK: Mottled Olive Thin Skin

WINGS: Ginger Z-Lon – split from 1 strand

THORAX: Iridescent Peacock, Black (Spirit River) – 2 fibers, twisted into a rope – 3-4 turns

A variation on Mike Mercer’s Z Wing Caddis for the Rhyacophila hatch that occurs in the Eastern Sierras March – August. It may also be tied in Tan.That would be the Emerging Pupal stage of this guy…

EWR FREE LIVING CADDIS

Free living Caddis…East Walker River, Bridgeport, CA…

Materials RYCHO Z-WING CADDIS… RYCHO ZELON CAD GRP RYCHO Z-WING CADDIS…

The Hooks and Beads…

D 1167 & H 390 BL

F.Y.I. – The Daiichi 1167, #14 & Hanak H 390 BL – side by side…Hans explains the real KLINKHAMER…HERE…

B CADDIS B. CADDIS (JIG) – Bloom/Variant …

HOOK: Hanak 450 BL Hook, #10 – #16

THREAD: Under Abdomen, Tiemco 16/0, Black

ABDOMEN: Ultra Wire, Fl. Chartreuse, Brassie or Small – depending on hook size –  * Coat with UV Resin

HACKLE: MP Select CDC feather fibers in a dubbing loop

HOT SPOT: Veevus 8/0, Fl. Chartreuse

BEAD: Slotted Faceted Tungsten Bead, Black, sized to hook or over sized x1

A number of years ago, I walked into this fly shop at Four Corner’s, outside of Bozeman, MT and found this simple little Caddis attractor that used chartreuse wire, CDC and a tungsten bead. That shop is now history but it had more flies in any one place than I have ever seen – before or since. So… I picked up a couple of those little guys that were designed by Dave Bloom. One of the results may be seen below…they may also be tied with copper wire, tan CDC and a copper bead…

pop-3-00-rainbow

The original worked like a charm…in here…Madison River, MT…

Materials B. CADDIS… B.CADDIS GRP B. CADDIS(s)… HURRICANE BUG HURRICANE BUG (JIG…

HOOK: Hanak 450 BL Hook, #10 – #16

THREAD: Lagartun 74 Denier, Rust – Abdomen / Tiemco 10/0, Dk. Brown, to secure thorax

WEIGHT: .010 Lead or .)15 Lead Sub.

TAIL: Coq De Leon, Dark Speckled

ABDOMEN: Lagartun Thread

RIB: Sulky Opalescent Thread – * coat with UV Resin

THORAX: Micro UV Chenille, Hot Orange

BEAD: Slotted Tungsten Copper – sized to hook or oversized x1

A flashy, easy to tie attractor that drops like a rock. I’ll do an Olive version later…that guy below liked Flashy Orange…

ewr-sized-pop-brown-blog-27 One of my test subjects on the East Walker River…

Materials HURRICANE BUG… HURRICANE BUG(s)…

Next: Wobble Bugs

PT/TB

Advertisements

Read Full Post »